Design features: Cash desk with delivery conveyor belt, folding push-in device and large goods compartment. Suitable for the use of block and modular cash registers. With the help of the folding push-in device there is a possibility of checking out small quantities of goods within the immediate reach of the cashier and also large quantities of goods directly and easily in the trolley. The folding push-in device is on the side where the customers pass through. It can be opened, for entering and leaving, by simple hand operation, and in the closed position it is used as the goods transfer point. It is possible to look into the goods trolley so that the danger of theft is largely eliminated. BA, Varius, SOL, SLZ-E and DIY models can also be supplied without conveyor belt, but with goods counter.

WAY OF WORKING of BA, Varius, SOL, SLZ-E and DIY cash desks:The customer goes with his goods trolley past the right hand side of the cash desk and places the goods on the conveyor belt. By operating the foot switch the cashier brings the goods within her reach, registers the goods (with a view into the goods trolley) and pushes them into the goods compartment. The folding sliding-in device serves as the goods transfer point and is to be kept free of goods. For large quantities of goods the cashier opens the folding sliding-in device and reads the price off direct from the goods trolley. By simple hand operation the device can be closed again and the second customer, who has already placed his goods on the belt, can be served.

The cash register, cashier, cash desk and customer are adjusted to one another in the TACKENBERG design in such a way that smooth handling and the fastest possible check-out are ensured.
 

Varius-Abrechnungsart

SOL-Abrechnungsart

Design features: Cash desk with delivery conveyor belt and 2 or 3 goods compartments. Due to the carefully selected gradient of the goods compartment the goods can be sent into the goods compartment effortlessly.

At the same time 3 or 4 customers can be served at the cash desk so that very quick checking out is possible. Suitable for the use of block and modular cash registers.
 

WAY OF WORKING for multi-compartment checkouts: The customer goes with his goods trolley to the righthand side of the cash desk and places the goods on the conveyor belt. The cashier fetches the goods to within her reach by operating the foot swith or light barrier, registers the goods of the first customer and pushes them into the outer goods compartment. In the meantime a second customer has placed the goods on the belt and the goods are fed to the next goods compart
 
 

Modell Obint	Modell Obint

 

Design features:

Cash desks with one or two conveyor belts (delivery and distribution belt), novel goods routing and goods compartment roller conveyor. By means of the novel goods routing the goods are passed easily and in a space-saving manner into the goods compartment. Even heavy and large packages can be conveyed without difficulty. Suitable for the use of block and modular cash registers.
 

WAY OF WORKING of VM SLR, OBLIGAT W, SLWS cash desks: The customers goes with his goods trolley to the righthand side of the cash desk and lays the goods on the delivery conveyor belt. The cashier brings the goods within her reach by operating the foot switch or the light barrier, registers the goods and conveys them to the goods routing section. From there they are passed by the goods compartment conveyor belt located parallel to the goods compartment) into the goods compartment. Due to the novel kind of goods routing and the goods compartment conveyor belt the whole goods compartment is supplied easily and in a space-saving manner. The customer packs his goods into the goods trolley. In the meantime a second customer has placed his goods on the belt and the procedure in repeated.
 

Obligat W - Abrechnungsart
	Obligat W - Abrechnungsart

Design features : Cash desk with delivery conveyor belt and angled trolley routing. Through the angled trolley guide the strenuous and time-consuming turning and swivelling of the goods trolley is eliminated. Moreover, straight and direct customer check-out is ensured so that no unnecessary loss of time occurs. Suitable for the use of block and modular cash registers. The danger of theft is eliminated as far as possible as the cashier has a clear view of the contents of the goods trolley while registering.
 

WAY OF WORKING of VM cash desks: The customer goes with his goods trolley to the right hand side of the cash desk an places the goods on the conveyor belt. The cashier brings the goods within her reach by operating the foot switch or the light barrier, registers the goods (with a view into the goods trolley) and pushes them onto the counter or, if necessary, into the goods trolley. In the meantime, the second customer has placed the goods on the belt and the procedure is repeated.
 
 

VMR-Abrechnungsart	VMR-Abrechnungsart

VM-Abrechnungsart mit Sicherheitsglasscheibe

VM-Abrechnungsart in FUTURE-COCKPIT-LINE	VM-Abrechnungsart in FUTURE-COCKPIT-LINE

DESIGN in three main features

Self-supporting conveyor belt design of steel tubing in the whole goods handling section, with integral service box and electrical equipment.

QUALITY

The "EUROPA" form cash desks are made of a combination of chromium steel, steel tubing and plastic panelling with insulation material.
The rear outer sides are provided with coloured plastic panelling. The interiors of the cash desks are also provided with bright-coloured plastic panelling so that all the inner parts have a plastic facing.
The individual conveyor units each consist of one circulating conveyor belt with chromium steel, driven by a special motor.
The front wide sides of the cash desk are povided with a chromium steel bar as protection from bumps and scratches. An all-round plastic guard protects the adjoining area of the service box. Thus the cash desk is protected from bumping and abrasion along the whole wide side.
 

SERIES INSTALLATION

The TACKENBERG "EUROPA" shape, high-duty cash desks are electrically equipped ready for use and only need to be connected to the mains. There are no erection costs. The electric equipment installed in series includes per cash desk the necessary motor protective switch, circuit breaker, short circuit fuses and wiring. The cash desks are designed in accordance with ergonomic principles.
The required criteria are fully fulfilled by us at the cash desk workplace.
 

1. TEMPERATURE at the cash desk workplace

Our cash desks are equipped with fully protective panelling and a separate cash desk floor. The coldreflecting materials used have an insulating and noise abating effect (less phon than specified) an thus provide protection from cold from below and radiant cold. Moreover, all TACKENBERG cash desks can be additionally provided with windshield panelling and special heating units. In the case of draughts the Trade Supervisory Office demands protection for the cashier. (Please state in order.)
 

2. TECHNICAL EFFICIENCY of the workplace

All TACKENBERG cash desks have been checked. Every drive unit used can be switched on individually (main and separate switches). The motors and electrical equipment are provided with interference suppressors in accordance with VDE. In addition, the motors are provided with a heat protection switch against overload and an additional fine-wire fuse against shortcircuits. Connection for each cash desk is to its own electric circuit. Mechanically rotating parts are pro-vided with accident prevention devices. A spring plate in the destribution area of the conveyor belt ensures additional protection and safety.
 
 

3. SIZE + EQUIPMENT of the cash desk

TACKENBERG cash desks are dimensioned in such a way that one-hundred percent knee and turning clearance within the cash desk is ensured. Due to the well thoughtout design the cash desk can be operated in a semicicle. The handling range corresponds to the reach required so that convenient and very quick checking out is possible. Moreover, the required belt height and distances from the cash desk floor to the cash register supporting plate. The necessary legroom for knees and feet is provided. The design produced in accordance with the latest ergonomic insights ensures easy reading-off, easy conveying of the goods, no need for exertion, eye contact with the customer, in a comfortable cash desk wordplace.
 

Safety Act Special cash desk chair on castors, according to DIN, with braked castors, height adjustable, upholstered, 5-arm base, with Liftomat.

Plexi windshield panelling, for all models.

Special rear wall or mat heating system, of double aluminum sheet, with inner concealed heating element, based on conductive foil, including adjustable temperature controller.
 
 

Footrest V45/F, height and inclination adjustable, with foot switch insert.

Cash desk door.

Light barrier.

Safety proximity switch on the spring plate.

Further necessary accessories, such as, for example, mountings for modular systems, scanner systems, cash desk lights etc. available on request.
 
 
 

---

Erste Seite / first site